From olaf.diegel at design.lth.se Sat Sep 15 10:15:21 2018 From: olaf.diegel at design.lth.se (Olaf Diegel) Date: Sat, 15 Sep 2018 07:15:21 +0000 Subject: [rp-ml] Need alternative metal powder sources Message-ID: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se> Greetings All, I have a 3D Systems DMP 320 metal AM system, and am looking for alternative sources of metal powders that are compatible with the system. In particular, I am currently after AlSi10Mg powder, but will also later be after other powders. If anyone knows of a good source for such powder, the information would be greatly appreciated. Alternatively, if any one happens to know the powder particle size distribution for the DMP320 machines (for aluminium powder, my guess is either in the 15-45um or 20-63um range (I know the filter size on the sieve is 80 microns)), that would be helpful too. All the best Olaf Olaf Diegel Professor of Product Development School of Engineering, Department of Design Sciences [Description: Lunds_universitet_C2r_CMYK] Box 118, 221 00 Lund Physical address IKDC Design Centre, S?lvegatan 26, Lund 22362, Sweden Telephone +46-46-222 15 56 olaf.diegel at design.lth.se www.product.lth.se -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 2969 bytes Desc: image001.gif URL: From adler at a3dm.com Sat Sep 15 15:35:21 2018 From: adler at a3dm.com (Steven Adler (A3DM)) Date: Sat, 15 Sep 2018 12:35:21 +0000 Subject: [rp-ml] Need alternative metal powder sources In-Reply-To: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se> References: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se> Message-ID: <184E334C-9CFB-4E91-A655-6FF62BF108D2@a3dm.com> Olaf Tekna Advanced Materials has what you are looking for Offices in Macon, France and Headquartered in Sherbrooke Quebec Contacts are attached Steven Adler Mobile 503-250-3324 On Sep 15, 2018, at 2:16 AM, Olaf Diegel > wrote: Greetings All, I have a 3D Systems DMP 320 metal AM system, and am looking for alternative sources of metal powders that are compatible with the system. In particular, I am currently after AlSi10Mg powder, but will also later be after other powders. If anyone knows of a good source for such powder, the information would be greatly appreciated. Alternatively, if any one happens to know the powder particle size distribution for the DMP320 machines (for aluminium powder, my guess is either in the 15-45um or 20-63um range (I know the filter size on the sieve is 80 microns)), that would be helpful too. All the best Olaf Olaf Diegel Professor of Product Development School of Engineering, Department of Design Sciences Box 118, 221 00 Lund Physical address IKDC Design Centre, S?lvegatan 26, Lund 22362, Sweden Telephone +46-46-222 15 56 olaf.diegel at design.lth.se www.product.lth.se _______________________________________________ rp-ml mailing list rp-ml at rp-ml.org http://rapid.rp-ml.org/mailman/listinfo/rp-ml -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 2969 bytes Desc: image001.gif URL: From Remy.Pontone at tekna.com Sat Sep 15 16:08:41 2018 From: Remy.Pontone at tekna.com (=?iso-8859-1?Q?R=E9my_Pontone?=) Date: Sat, 15 Sep 2018 13:08:41 +0000 Subject: [rp-ml] Need alternative metal powder sources In-Reply-To: <184E334C-9CFB-4E91-A655-6FF62BF108D2@a3dm.com> References: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se> <184E334C-9CFB-4E91-A655-6FF62BF108D2@a3dm.com> Message-ID: Dear Olaf, Thanks for your email. We do sell usually 2 sizes for customers having PROX 320 machines : 5-25 microns or 20-63 microns. Our Technical Sales Engineer, Mr Thibault Azam, will contact you on Monday with all necessary technical informations. In case you would need more informations or support please feel free to contact us any time. Best regards, R?my R?my Pontone Vice President Sales & Marketing - Group Product Line Director - Materials Managing Director - Tekna Plasma Europe email: remy.pontone at tekna.com T?l?phone : +33(0)3 85 23 91 37 Cell. : +33(0)6 70 05 97 95 Web Site : www.tekna.com [cid:image002.png at 01D2E682.9C9FC8E0] 200 boulevard de la R?sistance * 71000 M?con * France AVIS DE CONFIDENTIALIT? Ce message est ? l'usage exclusif de son destinataire et peut contenir des renseignements confidentiels et/ou privil?gi?s. Si vous n'?tes pas le destinataire vis?, veuillez nous en informer imm?diatement et d?truire ce message et toute pi?ce jointe, sans en garder de copie. La divulgation, la reproduction, la distribution ou toute autre action relative au contenu du message est strictement interdite. Nous n'assumons aucune responsabilit? pour l'interception de toute communication par Internet ou la transmission de virus informatiques. NOTICE OF CONFIDENTIALITY This message is for the exclusive use of its recipient and may contain confidential and/or privileged information. If you are not the intended recipient, please notify us immediately and destroy this message and any attachment, without retaining a copy. Disclosure, copy, distribution or any action concerning the content of this message is strictly prohibited. We assume no liability for the interception of any communication via the Internet or the transmission of computer viruses. De : Steven Adler (A3DM) [mailto:adler at a3dm.com] Envoy? : samedi 15 septembre 2018 14:35 ? : Rapid Prototyping Mailing List Cc : J?r?me Pollak ; R?my Pontone Objet : Re: [rp-ml] Need alternative metal powder sources Olaf Tekna Advanced Materials has what you are looking for Offices in Macon, France and Headquartered in Sherbrooke Quebec Contacts are attached Steven Adler Mobile 503-250-3324 On Sep 15, 2018, at 2:16 AM, Olaf Diegel > wrote: Greetings All, I have a 3D Systems DMP 320 metal AM system, and am looking for alternative sources of metal powders that are compatible with the system. In particular, I am currently after AlSi10Mg powder, but will also later be after other powders. If anyone knows of a good source for such powder, the information would be greatly appreciated. Alternatively, if any one happens to know the powder particle size distribution for the DMP320 machines (for aluminium powder, my guess is either in the 15-45um or 20-63um range (I know the filter size on the sieve is 80 microns)), that would be helpful too. All the best Olaf Olaf Diegel Professor of Product Development School of Engineering, Department of Design Sciences Box 118, 221 00 Lund Physical address IKDC Design Centre, S?lvegatan 26, Lund 22362, Sweden Telephone +46-46-222 15 56 olaf.diegel at design.lth.se www.product.lth.se _______________________________________________ rp-ml mailing list rp-ml at rp-ml.org http://rapid.rp-ml.org/mailman/listinfo/rp-ml -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 6000 bytes Desc: image001.png URL: